| Picture |
Heading |
Updated |
 |
Multi-hatch Gauge
... |
2017-12-26 |
 |
Lab Mixer
This BEVS2501/1 laboratory mixer has been designed for blending multi – component formulations. It is really helpful device for dispersing small to medium size quantities of varying viscosities.
The built in frequencer allows to regulate the RPM of ... |
2017-12-19 |
 |
Cup Stand BEVS 1102/1/2
Introduction:
BEVS Flow Cup Stand is used in concert with
Ford Cup, DIN Cup, Afnor Cup and other
similar cups, provides the level of platform
for the cups. It is made up of three adjustable
stainless steel poles and aluminum level
bubble plate.... |
2017-12-17 |
 |
Zahn Cup
Introduction:
BEVS 1107 Zahn Cup is designed according
to the standard of ASTM D4212- 93 Zahn
Cup,it can be used to measure the viscosity of
Newtonian or near- Newtonian liquids. Adjustable
i n anywhere such as the workshop, factory... |
2017-12-16 |
 |
Wet Film Thickness Wheel
... |
2017-12-10 |
 |
Iwata Cup
Introduction:
Quickly measure the flow time of paint
and other similar liquid in the laboratory
or on testing spot. It is widely applied to
the coatings R&D department.
Technical Specification:
Orifice: 3. 5mm
Materia... |
2017-12-05 |
 |
60° Glossmeter
Please contact us for more info. Thank you.... |
2017-11-12 |
 |
Cylindrical Mandrek Bend Tester
1.Specifications
Size: 325*150*125mm（L*W*H）
Gross Weight: 6Kg（Include Mandrels）
Sample Thickness: 0.3-1mm
(1mm sample only can use the mandrels which its diameter is more than 5mm)
Mandrels: 2/3/4/5/6/8/10/12/13/16/19/20/25/32mm
Max. ... |
2017-11-12 |
Friends links
E-mail: